Precision Ceramics USA
Total Ceramic Solutions for the 21st Century
511
West Bay Street, Suite 350, Tampa, FL 33
 |
|
A selection of Fish Spine Beads, designed, engineered, prototyped and manufactured by Precision Ceramics USA |
For many years fish spine beads have been used as a practical method of insulating wires with the beads interlocking together to provide continuous electrical insulation. Traditionally, the beads have been manufactured from a porcelain which although excellent for electrical purposes has not been mechanically strong or dense enough to be used in vacuum chambers or similar scientific instruments.
Precision Ceramics has now launched a range of standard fish spine beads, all manufactured from high purity alumina and therefore vacuum compatible and fully dense. The beads shown in the table below are the basis of our standard range and is available from stock. Other sizes can be quoted and supplied on request.
| 96% Alumina | 99.5% Alumina | OD | ID | Length |
| PC52 | PC51 | 0.090" | 0.040" | 1/8" |
| PC50 | PC49 | 0.090" | 0.050" | 1/8" |
| PC53 | PC47 | 0.125" | 0.056" | 1/8" |
| PC48 | PC54 | 0.170" | 0.063" | 3/16" |
| PC56 | PC55 | 0.330" | 0.133" | 5/16" |
Precision Ceramics
USA Inc, 511 West Bay Street, Suite 350, Tampa, FL 33
Website designed & managed by CCB Marketing & Promotion Limited - © MMIX - MMXII - Precision Ceramics USA Inc - all rights reserved